Welcome Falcon Mamba: The first strong attention-free 7B model
Falcon Mamba is a new model by Technology Innovation Institute (TII) in Abu Dhabi released under the TII Falcon Mamba 7B License 1.0. The model is open access and available within the Hugging Face ecosystem here for anyone to use for their research or application purposes.
In this blog, we will go through the design decisions behind the model, how the model is competitive with respect to other existing SoTA models, and how to use it within the Hugging Face ecosystem.
First general purpose large-scale pure Mamba model
Transformers, based on the attention mechanism, are the dominant architecture used in all the strongest large language models today. Yet, the attention mechanism is fundamentally limited in processing large sequences due to the increase in compute and memory costs with sequence length. Various alternative architectures, in particular State Space Language Models (SSLMs), tried to address the sequence scaling limitation but fell back in performance compared to SoTA transformers.
With Falcon Mamba, we demonstrate that sequence scaling limitation can indeed be overcome without loss in performance. Falcon Mamba is based on the original Mamba architecture, proposed in Mamba: Linear-Time Sequence Modeling with Selective State Spaces, with the addition of extra RMS normalization layers to ensure stable training at scale. This choice of architecture ensures that Falcon Mamba:
can process sequences of arbitrary length without any increase in memory storage, in particular, fitting on a single A10 24GB GPU.
takes a constant amount of time to generate a new token, regardless of the size of the context (see this section)
Model training
Falcon Mamba was trained with ~ 5500GT of data, mainly composed of RefinedWeb data with addition of high-quality technical data and code data from public sources. We used constant learning rate for the most of the training, followed by a relatively short learning rate decay stage. In this last stage, we also added a small portion of high-quality curated data to further enhance model performance.
Evaluations
We evaluate our model on all benchmarks of the new leaderboard's version using the lm-evaluation-harness package and then normalize the evaluation results with Hugging Face score normalization.
model name
IFEval
BBH
MATH LvL5
GPQA
MUSR
MMLU-PRO
Average
Pure SSM models
Falcon Mamba-7B
33.36
19.88
3.63
8.05
10.86
14.47
15.04
TRI-ML/mamba-7b-rw*
22.46
6.71
0.45
1.12
5.51
1.69
6.25
Hybrid SSM-attention models
recurrentgemma-9b
30.76
14.80
4.83
4.70
6.60
17.88
13.20
Zyphra/Zamba-7B-v1*
24.06
21.12
3.32
3.03
7.74
16.02
12.55
Transformer models
Falcon2-11B
32.61
21.94
2.34
2.80
7.53
15.44
13.78
Meta-Llama-3-8B
14.55
24.50
3.25
7.38
6.24
24.55
13.41
Meta-Llama-3.1-8B
12.70
25.29
4.61
6.15
8.98
24.95
13.78
Mistral-7B-v0.1
23.86
22.02
2.49
5.59
10.68
22.36
14.50
Mistral-Nemo-Base-2407 (12B)
16.83
29.37
4.98
5.82
6.52
27.46
15.08
gemma-7B
26.59
21.12
6.42
4.92
10.98
21.64
15.28
Also, we evaluate our model on the benchmarks of the first version of the LLM Leaderboard using lighteval.
model name
ARC
HellaSwag
MMLU
Winogrande
TruthfulQA
GSM8K
Average
Pure SSM models
Falcon Mamba-7B*
62.03
80.82
62.11
73.64
53.42
52.54
64.09
TRI-ML/mamba-7b-rw*
51.25
80.85
33.41
71.11
32.08
4.70
45.52
Hybrid SSM-attention models
recurrentgemma-9b**
52.00
80.40
60.50
73.60
38.60
42.60
57.95
Zyphra/Zamba-7B-v1*
56.14
82.23
58.11
79.87
52.88
30.78
60.00
Transformer models
Falcon2-11B
59.73
82.91
58.37
78.30
52.56
53.83
64.28
Meta-Llama-3-8B
60.24
82.23
66.70
78.45
42.93
45.19
62.62
Meta-Llama-3.1-8B
58.53
82.13
66.43
74.35
44.29
47.92
62.28
Mistral-7B-v0.1
59.98
83.31
64.16
78.37
42.15
37.83
60.97
gemma-7B
61.09
82.20
64.56
79.01
44.79
50.87
63.75
For the models marked by star, we evaluated the tasks internally, while for the models marked by two stars, the results were taken from paper or model card.
Processing large sequences
Following theoretical efficiency SSM models in processing large sequences, we perform a comparison of memory usage and generation throughput between Falcon Mamba and popular transfomer models using the optimum-benchmark library. For a fair comparison, we rescaled the vocabulary size of all transformer models to match Falcon Mamba since it has a big impact on the memory requirements of the model.
A standard approach for prefill is to process the whole prompt in parallel to fully utilize GPU. This approach is used in optimum-benchmark library and we will refer to it as parallel prefill. Parallel prefill needs to store in memory the hidden states of each token in the prompt. For transformers, this additional memory is dominated by the memory of stored KV caches. For SSM models, no caching is required, and the memory for storing hidden states becomes the only component proportional to the prompt length. As a result, the memory requirement will scale with prompt length, and SSM models will lose the ability to process arbitrary long sequences, similar to transformers.
An alternative to parallel prefill is to process the prompt token by token, which we will refer to as sequential prefill. Akin to sequence parallelism, it can also be done on larger chunks of the prompt instead of individual tokens for better GPU usage. While sequential prefill makes little sense for transformers, it brings back the possibility of processing arbitrary long prompts by SSM models.
With these remarks in mind, we first test the largest sequence length that can fit on a single 24 GB A10 GPU, putting the results on the figure below. The batch size is fixed at 1, and we are using float32 precision. Even for parallel prefill, Falcon Mamba can fit larger sequences than a transformer, while in sequential prefill, it unlocks its full potential and can process arbitrary long prompt
Next, we measure the generation throughput in a setting with a prompt of length 1 and up to 130k generated tokens, using batch size 1 and H100 GPU. The results are reported in the figure below. We observe that our Falcon Mamba is generating all the tokens at constant throughput and without any increase in CUDA peak memory. For the transformer model, the peak memory grows, and generation speed slows down as the number of generated tokens grows.
How to use it within Hugging Face transformers?
The Falcon Mamba architecture will be available in the next release of the Hugging Face transformers library (>4.45.0). To use the model, make sure to install the latest version of Hugging Face transformers or install the library from the source.
Falcon Mamba is compatible with most of the APIs Hugging Face offers, which you are familiar with, such as AutoModelForCausalLM or pipeline :
from transformers import AutoModelForCausalLM, AutoTokenizer
model_id = "tiiuae/falcon-mamba-7b"
tokenizer = AutoTokenizer.from_pretrained(model_id)
model = AutoModelForCausalLM.from_pretrained(model_id, torch_dtype="auto", device_map="auto")
inputs = tokenizer("Hello world, today", return_tensors="pt").to(0)
output = model.generate(**inputs, max_new_tokens=100, do_sample=True)
print(tokenizer.decode(Output[0], skip_special_tokens=True)) As the model is large, it also supports features such as bitsandbytes quantization to run the model on smaller GPU memory constraints, e.g.:
from transformers import AutoModelForCausalLM, AutoTokenizer, BitsAndBytesConfig
model_id = "tiiuae/falcon-mamba-7b"
tokenizer = AutoTokenizer.from_pretrained(model_id)
quantization_config = BitsAndBytesConfig(load_in_4bit=True)
model = AutoModelForCausalLM.from_pretrained(model_id, quantization_config=quantization_config)
inputs = tokenizer("Hello world, today", return_tensors="pt").to(0)
output = model.generate(**inputs, max_new_tokens=100, do_sample=True)
print(tokenizer.decode(output[0], skip_special_tokens=True)) We are also pleased to introduce the instruction-tuned version of Falcon Mamba, which has been fine-tuned with an additional 5 billion tokens of supervised fine-tuning (SFT) data. This extended training enhances the model's ability to perform instructional tasks with better precision and effectiveness. You can experience the capabilities of the instruct model through our demo, available here. For the chat template we use the following format:
<|im_start|>user
prompt<|im_end|>
<|im_start|>assistantYou can also directly use the 4-bit converted version of both the base model and the instruct model. Make sure to have access to a GPU that is compatible with bitsandbytes library to run the quantized model.
You can also benefit from faster inference using torch.compile; simply call model = torch.compile(model) once you have loaded the model.
Acknowledgments
The authors of this blog post would like to thank the Hugging Face team for their smooth support and integration within their ecosystem, in particular
Alina Lozovskaya and Clementine Fourrier for helping us evaluating the model on the leaderboard
Arthur Zucker for the transformers integration
Vaibhav Srivastav, hysts and Omar Sanseviero for their support with questions related to Hub
The authors would also like to thank Tri Dao and Albert Gu for implementing and open-sourcing Mamba architecture to the community.
readers loved this